Employment Opportunities

Process Control Engineer - Houston, Texas

Job Description/Requirements
3-10 years Honeywell TDC 3000 experience required and 2-10 years process with DMC+ or RMPC Ttraining and AspenPlus training .Must have petrochemical refinery experience on TDC 3000 Troubleshooting, GUS and US process and modeling, computer programming, training operators and process engineers. MUST HAVE BS CHEMICAL ENGINEERING

For more information
You may send a short e-mail message describing your relevant experience or your resume to John Wright wright@corpimg.com.

Back to Top

Process/ Refinery Engineer - KS, TX, WY, AR, LA, OK

Job Description/Requirements
Perform process monitoring of refinery and chemical process units. Conduct unit test runs. Troubleshoot operational problems. perform process engineering calculations such as heat transfer coefficients and furnace efficiencies to develop recommendations for equipment or operational changes. Monitor quality.

Must be able to interact with process operators, supervisors and other engineers. Min. 2+ years exp in refining, petro chemical or chemical facility. BSChemE degree.

For more information
You may send a your resume describing your relevant experience or your resume to John Wright wright@corpimg.com. or FAX resume to 901/360-0813.

Back to Top

Corrosion Engineer - Wichita, Kansas

Job Description/Requirements
Manage capital and maintenance projects. Develop metallurgical standards for the plants fixed equipment. Perform Root Cause Failure Analysis on equipment/ tanks/ pipe/ heat exchangers. Direct upgrades to improve reliability of the plants fixed equipment. Direct equipment repairs, develop standard repair spec's and guidelines. Supv 2-4.

BS degree in ChemE or ME, Civil or Metallurgical Engrg. Minimum of 10 years exp in refinery, chem or petrochem facility maintenance. Knowledge of predictive maintenance methods including PCMS, thermography, UT, online corrosion monitoring.

For more information
You may send an e-mail message describing your relevant experience or your resume to John Wright - wright@corpimg.com or fax 901/360-0813.

Back to Top

Process Engineer - Columbia, South Carolina

Job Description/Requirements
Will provide project and process engineering support regarding production of plastic extrusion products. Initiate corrective actions, troubleshoot equipment malfunctions, review equipment/process performance, document ISO-9000 compliance, transfer new processes, methods, and techniques to production lines for start-up or revised products. Reports to the Technical Services Manager.

2+ years Manufacturing or Process Engineering experience within the plastic extrusion, optical networking systems or fiber optics manufacturing industry.

For more information
You may send a short e-mail message describing your relevant experience or your resume to Barry Mathews mathews@corpimg.com. or FAX resume to 901/360-0813.

Back to Top

Process Engineer - Memphis, Tennessee

Job Description/Requirements
Responsible for applying engineering principles to design, modify, or develop facilities, testing, machines, equipment, or processes used in processing or manufacturing products. Will work with R&D , establishing and documenting the process for manufacturing each new product. Determines feasibility of designing new plant equipment or modifying existing facilities considering costs, space, time, etc. Compiles and analyzes operational, test, and research data to establish performance standards for newly designed or modified equipment. Provides technical information concerning manufacturing or processing techniques, materials, properties, and process advantages and limitations which affect long range plant and engineering planning.

KEYS:
* BS Degree in IE, ME, or ChemE.
* Should have 2 to 5 years of relevant process engineering experience.
* Ability to define problems, collect data, establish facts, and draw valid conclusions.
* Ability to work with mathematical concepts such as probability and statistical inference.
* Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.

For more information
You may submit your resume to Joe Knose - jknose@corpimg.com.

Process Engineer - Tennessee

Job Description/Requirements
Will be responsible for optimization, trouble-shooting, production and quality yield enhancements, cost reductions, some projects and the day-to-day production. $45-60K

Requires BS ChemE degree and 3 + years experience in Chemical Process Engineering.

For more information
You may send a short e-mail message describing your relevant experience or your resume to Barry Mathews mathews@corpimg.com.

Back to Top

Process Design Engineer - Tennessee

Job Description/Requirements
Will be responsible for the design and development of PID's and PFD's and Heat & Materials Balances to include sizes and types of piping and valves, instrumentation and controls to run continuous process and vessels needed. $50-65K

Requires BS ChemE degree and 3 + years experience in Process Design in Chemical plant..

For more information
You may send a short e-mail message describing your relevant experience or your resume to Barry Mathews mathews@corpimg.com.

Back to Top

General Inquiries

To further explore any of the opportunities mentioned on this page, please send your resume and salary history to the following address:

Corporate Image Group
Attn: Barry Mathews
2215 West Street #2
Germantown, TN 38138
Fax: 901/360-0813

All materials will be kept in strictest confidence.

Use your browser's Back button to return to your previous location in this page.

Back to Top

	Corporate Image Group
P. O. Box 342511 Bartlett, TN 38184 Phone (901) 380-4801 Email: judy@corpimg.com	2215 West Street, Suite 2 Germantown, TN 38138 Phone (901) 360-8091 or (800) 823-5100 Fax (901) 360-0813 Email: mathews@corpimg.com	279 North Zinns Mill Road, Suite F Lebanon, PA 17042 Phone (717) 274-5733 Fax (717) 274-3448 Email: tdabich@corpimg.com

Corporate Image Group
Revised: April 06, 2005